產品型錄(PDF)
操作手冊(PDF)
產品介紹
WISE (Web Inside, Smart Engine) 為泓格科技所開發；具備自主邏輯控制與遠端監控通知等多項功能的智慧型控制器。在此系統下，使用者不再困擾於控制器中邏輯程式的撰寫，而僅需透過 WISE 所提供的網頁人機介面及滑鼠點選動作，即可完成控制器上工作邏輯的規劃，過程簡單且快速，其可大幅降低使用者在系統開發上的資源花費。
WISE-7504M 遵照 IEEE 802.3af 標準 (classification, Class 1) 中的 Power over Ethernet (PoE) 規範，可在 PoE 網路環境下透過網路線 (Category 5) 傳送電力。此功能提供了更大的靈活性及效率以簡化系統設計、節省空間並減少電線及電源插座的需求。此外，WISE-7504M 內建雙乙太網口 (Two-port Ethernet switch)，不需透過交換機 (Switch) 即可直接進行最多10個模組的串接。讓現場佈線更加方便。
WISE-7504M 提供 4 組 AI 通道、4 組 AO 通道及 4 組 DI 通道。透過內建的 IF-THEN-ELSE 邏輯規則執行引擎，WISE-7504M 可提供 I/O 通道監控、計時器/排程時序控制、E-mail/CGI 命令發送等功能，可運用於自動化監控應用中。此外，WISE-7504M 同時支援 Modbus TCP 及 MQTT 通訊協定，可與 SCADA、IoT 系統進行無縫整合。
產品特色
- 內建網頁伺服器，無須安裝軟體工具
- 無須撰寫程式，僅需要點選即可完成規則編輯
- 內建 IF-THEN-ELSE 的邏輯運算引擎
- 內建 I/O 通道 (4 組 AI 通道、4 組 AO 通道及 4 組 DI 通道)
- 支援 IO 通道監控、計數器、計時器、排程、Email 發送、CGI 命令發送等指令
- 透過 Modbus TCP 與 SCADA 系統進行無縫整合
- IEEE 802.3af 標準 Power over Ethernet (PoE)
- 內建雙乙太網口 (Two-port Ethernet switch)，提供 Daisy-Chain 方式連接
- 透過 MQTT 協定與 IT 及物聯網 (IoT) 系統進行無縫整合
產品應用
自動化建築、自動化工廠、自動化機械、遠端維護、遠端診斷及測試設備等。
硬體規格
| Analog Input | ||
| Channels | 4 (Differential) | |
| Type | ±500 mV, ±1 V, ±5 V, ±10 V, +0 mA to +20 mA, ±20 mA, 4 to 20 mA (Jumper Selectable) |
|
| Resolution | 16-bit | |
| Sampling Rate | 10 Samples/Second (Total) | |
| Accuracy | ±0.1 % | |
| Zero Drift | ±20 μV/°C | |
| Span Drift | ±25 ppm/°C | |
| Overvoltage Protection | 240 Vrms | |
| Overcurrent Protection | 50 mA Max. at 110 VDC/VAC Max. | |
| Common Voltage Protection | ±200 VDC | |
| Overcurrent Protection | Yes, 50 mA at 110 VDC | |
| Virtual Channel to Channel Isolation | Yes, 400 VDC | |
| Open Wire Detection for 4 ~ 20 mA | Yes | |
| Input Impedance | Voltage | 2 MΩ |
| Current | 125 Ω | |
| Common Mode Rejection | 86 dB Min. | |
| Normal Mode Rejection | 100 dB | |
| Analog Output | ||
| Channels | 4 | |
| Type | +0 VDC to +5 VDC, ±5 VDC, +0 VDC to +10 VDC,±10 VDC, +0 mA to +20 mA, +4 mA to +20 mA (Jumper Selectable) |
|
| Resolution | 12-bit | |
| Accuracy | ±0.1% of FSR | |
| Voltage Output Capability | 20 mA @ 10 V | |
| Current Load Resistance | 400 Ω | |
| Open Wire Detection | Yes, for 4 to 20 mA only | |
| Digital Input/Counter | ||
| Channels | 4 | |
| Dry Contact (Source) |
On Voltage Level | Close to GND |
| Off Voltage Level | Open | |
| Effective Distance for Dry Contact | 500 M Max. | |
| Wet contact (Sink/Source) |
On Voltage Level | +1 VDC Max. |
| Off Voltage Level | +3.5 VDC to +30 VDC | |
| Counters | Max. Counts | 16-bit (65535) |
| Max. Input Frequency | 50 Hz | |
| Min. Pulse Width | 10 ms | |
| Overvoltage Protection | 30 VDC | |
| Communication | ||
| Ethernet Port | 2 x RJ-45, 10/100 Base-TX, Swtich Ports | |
| PoE | Yes | |
| Protocol | Modbus TCP, MQTT | |
| LED Indicators | ||
| for System Running | Yes | |
| for Ethernet Link/Act | Yes | |
| for I/O Channel Status | Yes | |
| for PoE Power | Yes | |
| 2-Way Isolation | ||
| I/O | 2500 VDC | |
| EMS Protection | ||
| ESD (IEC 61000-4-2) | ±4 kV Contact for Each Terminal and ±8 kV Air for Random Point |
|
| EFT (IEC 61000-4-4) | ±2 kV for Power Line | |
| Surge (IEC 61000-4-5) | ±2 kV for Power Line | |
| Power | ||
| Reverse Polarity Protection | Yes | |
| Powered from Terminal Block | 12 to 48 VDC | |
| Powered from PoE | Yes, IEEE 802.3af, Class1 | |
| Consumption | 5.1 W (Max.) | |
| Mechanical | ||
| Dimensions (L x W x H) | 120mm x 97mm x 42mm | |
| Installation | Wall mounting | |
| Environment | ||
| Operating Temperature | -25 °C to +75 °C | |
| Storage Temperature | -30 °C to +80 °C | |
| Humidity | 10 to 90% RH, non-condensing | |
軟體規格
| Functions | |
| Rule Configuration Website | Access Web server on WISE controllers to edit and upload logic rules through web browser. |
| 72 IF-THEN-ELSE Logic Rules | 3 IF conditions with AND or OR operators 3 THEN actions and 3 ELSE actions |
| 48 Internal Registers | Hold temporary variables and read/write data |
| 24 Timers | Delay / Timing functions. |
| 24 Schedules | Setup prescheduled routine tasks. |
| 24 Emails | Send Email messages to pre-set Email receivers. |
| 24 CGI Commands | Send pre-set CGI commands. |
| 24 Recipes | Set up THEN/ELSE action groups. |
| 8 P2P remote modules | Set up the connection information for the remote WISE modules. |
| Modbus TCP Protocol | Real time control and monitoring I/O channels and system status of controllers via SCADA software. |
| MQTT Protocol | Real time message publish/subscribe mechanism for I/O channels and system status via IT/IoT software. |
| IF Conditions | |
| DI Channel | ON, OFF, ON to OFF, OFF to ON, Change |
| AI Channel | = 、> 、< 、 ≥ 、 ≤ (value) |
| Internal Register | |
| DI Counter | = 、> 、< 、 ≥ 、 ≤ (value), Change |
| Timer | Timeout, Not Timeout |
| Schedule | In Range, Out of Range |
| P2P | DI, AI, DI counter, DO counter, IR |
| Rule Status | Enable, Disable |
| THEN / ELSE Actions | |
| AO Channel | Change the value |
| Internal Register | |
| DI Counter | Reset |
| Timer | Start, Reset |
| Schedule | Enable, Disable |
| Send | |
| MQTT message | |
| CGI Commands | |
| Recipe | Execute |
| P2P | DO(On/Off), AO, IR |
| Rule Status | Enable, Disable |