PRODUCTS- 產品介紹 -

16點隔離型數位輸出 CAN-2057C



 產品型錄(PDF)

 Applications:
  • Alarm detector
  • Switch detection
  • I/O pair-connection
 
 
 
  Hardware Specifications: 
CANopen Interface
NMT
Slave
Error Control
Node Guarding protocol / Heartbeat Producer
No. of PDOs
10Rx , 10Tx
PDO Modes
Event Triggered, Remotely requested, Cyclic and acyclic SYNC
PDO Mapping
Available
No. of SDOs
1 server, 0 client
Emergency Message
Yes
CANopen Version
DS-301 v4.02
Device Profile
DSP-401 v2.1
Specification
ISO-11898-2, CAN 2.0A

Baud Rate (bps)
 Setting by Rotary Switch

10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, and 1 M

Node ID 
 Setting by Rotary Switch

1 ~ 99
Terminator Resistor
Switch for 120 Ω terminator resistor
Connector
5-pin screwed terminal block (CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+)
EDS file
Yes
Digital Output
Channels
16 (Sink)
Load Voltage
+5 ~ +30 VDC
Output Max Load Current
100 mA per channel
Output Type
Open-collector
Reaction Time
150 us
Intra-module Isolation
3750 Vrms
ESD Protection
4 kV Contact for each channel
LED
CANopen Status
3 LEDs for PWR/RUN/ERR
Terminal Resister
1 LED as terminal resister indicators
DO LED
16 LEDs as digital output indicators
Power
Power Supply
Unregulated +10 ~ +30 VDC
Power Consumption
1.5 W
Mechanism
Installation
DIN-Rail
Dimensions
32.3 mm x 99 mm x 77.5 mm ( W x L x H ) Detail
Environment
Operating Temp.
-25 ~ +75 ℃
Storage Temp.
-30 ~ +80 ℃
Humidity
10 ~ 90% RH, non-condensing