| Model |
M-7024U |
M-7024UD |
| Analog Output |
| Channels |
4 |
| Current Output Wiring |
Source |
| Range |
0 ~+5 VDC, ±5 VDC, 0 ~ +10 VDC, ±10 VDC, 0 ~ +20 mA, +4 ~ +20 mA |
| Resolution |
16-bit |
| Accuracy |
±0.02%% of FSR |
| DA Output Response Time |
10 ms per channel |
| Programmable Output Slope |
Voltage |
0.0625 ~ 512 V/Second |
| Current |
0.125 ~ 1024 mA/Second |
| Current Output Capacity |
1000 Ω |
| Open Wire Detection |
Yes, for 4 ~ 20 mA only |
| Short Circuit Protection |
Yes |
| Power-on Value |
Yes, Programmable |
| Safe Value |
Yes, Programmable |
| Digital Input |
| Channels |
4 |
| Wet Contact |
ON Voltage Level |
+1 VDC Max. |
| OFF Voltage Level |
+4 ~ 30 VDC |
| Dry Contact |
ON Voltage Level |
Close to GND |
| OFF Voltage Level |
Open |
Effective Distance
for Dry Contact |
500 M Max. |
| Counters |
Max. Count |
65535 (16-bit) |
| Max. Input Frequency |
100 Hz |
| Min. Pulse Width |
5 ms |
| Input Impedance |
- |
| Overvoltage Protection |
+60 VDC |
| Digital Output |
| Output Channels |
4 |
| Type |
Open Collector |
| Sink/Source (NPN/PNP) |
Sink |
| Load Voltage |
+3.5 VDC ~ +50 VDC |
| Max. Load Current |
700 mA/Channel |
| Overvoltage Protection |
60 VDC |
| Overload Protection |
1.4 A (with short-circuit protection) |
| Power-on Value |
Yes, Programmable |
| Safe Value |
Yes, Programmable |
|
| Model |
M-7024U |
M-7024UD |
| Communication |
| Interface |
RS-485 |
| Bias Resistor |
No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.) |
| Format |
(N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1) |
| Baud Rate |
1200 to 115200 bps |
| Protocol |
Modbus RTU, DCON |
| Dual Watchdog |
Yes, Module (1.6 Seconds), Communication (Programmable) |
| LED Indicators/Display |
| System LED Indicator |
Yes, 1 as Power/Communication Indicator |
| I/O LED Indicators |
- |
4 LEDs as Analog Input Fault Indicators
4 LEDs as Digital Input Indicators
4 LEDs as Digital Output Indicators |
| 7-Segment LED Display |
- |
| Isolation |
Intra-module Isolation,
Field-to-Logic |
2.5 kVDC |
| EMS Protection |
| ESD (IEC 61000-4-2) |
±8 kV Contact for each Terminal |
| EFT (IEC 61000-4-4) |
±4 kV for Power Line |
| Surge (IEC 61000-4-5) |
- |
| Power |
| Reverse Polarity Protection |
Yes |
| Input Range |
+10 ~ +30 VDC |
| Consumption |
4 W |
4.5 W |
| Mechanical |
| Dimensions (L x W x H) |
123 mm x 72 mm x 35 mm |
| Installation |
DIN-Rail or Wall Mounting |
| Environment |
| Operating Temperature |
-25 to +75°C |
| Storage Temperature |
-40 to +85°C |
| Humidity |
10 to 95% RH, Non-condensing |
|
