PRODUCTS- 產品介紹 -

10點類比輸入 CAN-2019C



  產品型錄(PDF)
  
 Applications:
 
 

  Hardware Specifications:
 
CANopen Interface
Connector 5-pin screwed terminal block (CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+)
Baud Rate (bps) 10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M, selected by rotary switch
Terminator Resistor DIP switch for the 120 Ω terminator resistor
Protocol CANopen CiA 301 ver4.02, CiA 401 ver2.1
Node ID 1~99 selected by rotary switch
NMT Slave
Error Control Node Guarding protocol / Heartbeat Producer
SDOs 1 server, 0 client
PDOs 10 RxPDO, 10 TxPDO (Supports dynamic PDO)
PDO Modes Event-triggered, remotely-requested, synchronous (cyclic), synchronous (acyclic)
Emergency Message Yes
EDS file Yes
Analog Input
Channels 10 (Differential)
Input Type +/- 15mV, +/- 50mV, +/- 100mV, +/- 500mV, +/- 1V, +/- 2.5V, +/- 5V, +/- 10V
+/-20mA,(Requires Optional External 125 Ohm Resistor)
Thermocouple (J, K, T, E, R, S, B, N, C)
Resolution 16-bit
Sampling Rate 10 Samples/Sec. (Total)
Accuracy +/-0.1% FSR
Zero Drift +/-10 uV/°C
Span Drift +/-25 ppm/ °C
Common Mode Rejection 86 dB Min.
Normal Mode Rejection 100 dB
Input Impedance >400 kΩ
Individual channel configuration Yes
Open Thermocouple Detection Yes
Over voltage protection 240 Vrms
ESD Protection +/-4kV, Contact for each terminal.
Intra-module Isolation, Field to Logic 3000 VDC
LED
CANopen Status 3 LEDs to PWR, RUN and ERR
Power
Power Supply Unregulated +10 ~ +30 VDC
Power Consumption 1.5 W
Mechanism
Installation DIN-Rail
Dimensions 33 mm x 99 mm x 78 mm ( W x L x H )
Environment
Operating Temp. -25 ~ 75 ℃
Storage Temp. -30 ~ 80 ℃
Humidity 10 ~ 90% RH, non-condensing

 ​Thermocouple Type:
 
Type Code Temperature Range (°C)
J -210 °C ~ +1200 °C
K -270 °C ~ +1372 °C
T -270 °C ~ +400 °C
E -270 °C ~ +1000 °C
R -50 °C ~ +1765 °C
S -50 °C ~ +1765 °C
B 0 °C ~ +1820 °C
N -270 °C ~ +1300 °C
C 0 °C ~ +2320 °C